Stardust Resin Crafting Starter Kit Gift

The set contains:

• Casting resin kit Fluid 0,25 kg.
• Background:
• PVC board for the production of a picture with a diameter of 30 cm.
• Paints and decorative materials:
• a set of 4 resin powder paints;
• set of 2 different colours of glitter glitter in resin;
• luminous resin powder 20 g;
• black tempera paint for colouring PVC board.
• Other components:
• hook for hanging the picture; (we recommend to glue the hook with instant glue).
• Aids and accessories:
• plastic film to cover the work surface;
• a sponge to apply the paint to the board;
• disposable gloves;
• resin mixing cups;
• wooden spatulas.
• Epoxy resin processing instructions and mixing ratio table.
• Instructions for working with the kit.

Other recommended aids not included in the kit:

• Electronic scale (to maintain the correct ratio when mixing the resin).
• Heat gun or hair dryer with flat attachment.
• Respirator to protect the respiratory tract from fumes.
• Instant glue.

The kit comes with instructions for processing the epoxy resin and a table of mixing ratios. So if you plan to give the set as a gift, the recipient will only need a scale and can start making original decorations. You can buy the scale here .

Want to create more colour combinations? Buy metallic powders, dyes, metallic flakes or other decorations and create other beautiful clock variations.

VIDEO: Stardust Kit Instructions

VIDEO: Get inspired to make another universe

Attention

• Observe the processing time, do not work with the finished mixture for more than 20 minutes. If this time is not observed, the products may not have the necessary properties (the finished products may be brittle) and the resin may start to heat up rapidly in the mixing vessel in a higher layer ( exothermic reaction) and deteriorate.
• Hot objects must not be placed on finished resin products. The product could be damaged.

Security measures

• We recommend that children under 18 years of age, pregnant and nursing women work with epoxy resin only with skin and respiratory protection, and that children work only under adult supervision.
• In case of eye contact, flush with plenty of water. Avoid swallowing or inhaling material; if swallowed or if mucous membranes are affected, seek medical attention.
• wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product.
• work in a well-ventilated area with (important!) low humidity (no more than 30-40%).
• the temperature must be no lower than 20 °C and no higher than 25-27 °C.
• work only with gloves, the resin can cause an allergic reaction on the skin.
• we recommend protecting your airways with a respirator or full-face mask.

Standard hazard sentences:
H315 Irritating to skin.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
H411 Toxic to aquatic life with long-lasting effects.
Instructions for safe handling:
P102 Keep out of reach of children.
P103 Read the label before use.
P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols.
P264 Wash thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/goggles/face shield.
P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water.
P305+P351+P338 IF EYE INJURY: Rinse gently with water for several minutes. Remove contact lenses if they are
deployed and if they can be removed easily. Continue rinsing.
P391 Collect the leaked product.
P404 Store in closed container.
P405 Store locked.
P501 Dispose of contents/packaging according to local/regional/state regulations. Packaging contaminated by the product
take it to a hazardous waste collection facility.
Additional hazard information: EUH205 Contains epoxy components. May cause an allergic reaction.
Designation for hazardous components: bis[4-(2,3-epoxypropoxy)phenyl]propane, ptert.butylphenyl-[1-(2,3-epoxy)propyl]-ether