Gift starter kit for making jewelry from UV resin

The set includes:

• UV resin 100 g. For more information about the resin, click on its name.
• UV lamp 36 W.
• Silicone moulds:
• silicone mould for cabochons 8,8 x 9 cm;
• silicone mould for pendants and earrings 8 x 12,5 cm.
• Paints and decorative materials:
• coloured metallic resin powders - set of 6 colours;
• dried flowers and leaves mix of colours and types in a box;
• 2x paper flowers mix of colours and types in a box of 4 x 4 cm;
• 2x metallic foil in box - gold and silver colour;
• decorative resin grits in mix of colours in plastic ring binder.
• Jewellery components:
• afrohooks golden colour - 10 pcs (5 pairs);
• silver coloured afrohooks 10 pcs (5 pairs);
• afro hooks with silver colour ? 12 mm - 8 pcs (4 pairs);
• afro hooks with golden colour ? 12 mm - 8 pcs (4 pairs);
• metal bed for making pendants ? 25 mm gold color - 4 pcs;
• metal bed for making pendants ? 25 mm silver color - 4 pcs;
• set of 10 resin jewellery frames - silver colour;
• gold-coloured connecting rings ? 6 mm 25 pcs;
• silver coloured connecting rings 6 mm 25 pcs;
• braided cord with carabiner 45 cm + 5 cm extension chain - 20 pcs.
• Aids and accessories:
• plastic film to cover the work surface;
• jewelry tape 5 m;
• disposable nitrile gloves 3 pairs;
• 40 ml mixing cups 10 pcs;
• plastic stirrer for mixing resin 5 pcs;
• tweezers;
• disposable apron.
• Instructions for working with the kit in four languages (CZ, SK, EN, DE).

If you plan to give the set as a gift, you don't need to buy anything else to go with it. Plus, the set is packaged in a beautiful, colourful box. The recipient can start making original jewellery right away.

Want to create more colour combinations? Buy metallic powders, dyes, metallic flakes or other decorations and create more beautiful jewellery. The moulds are reusable and the possibilities for jewellery making are countless!

Clouding of the UV resin (milky colour, white pieces, lumpiness, gelatinousness, etc.) is a common phenomenon caused by storage at temperatures below 20 °C (in storage, during transport, in dispensers, etc.). If you find this cloudiness, place the sealed bottle in a warm water bath (50-70 °C) for 20-30 minutes and the cloudiness will disappear. Repeat if necessary. Let cool and then process.

Here you will find the video instructions for the kit:

Information on the UV resin included in the kit:

• Thin layers take approx. 2 minutes to cure, thicker layers up to a maximum width of 3 mm take approx. 4 minutes to cure. The length of curing directly depends on the degree of colouring and the embedded objects.
• It is self-levelling, creating a smooth surface.
• It cures in direct sunlight for 5-10 minutes, in indirect sunlight for 20-40 minutes.
• This resin is designed for layers of maximum 3 mm. If the resin is clear and without embedded objects, it is possible to cure the entire 3 mm. In the case of thicker colouring or insertion of objects through which the light from the UV lamp cannot penetrate, we recommend applying in thinner layers and curing these layers continuously. Depending on the layer and the amount of pigmentation, curing may take longer than the above times.
• If the surface remains sticky after curing, we recommend using the UV curing lamp again. Another option is to wipe the surface with a paper towel dipped in acetone or nail polish remover.

Please be careful!

• Colour display can vary greatly on different digital devices.
• Wear protective equipment when working with UV resin. Cover the finished casting as best as possible to prevent dust from getting on it before final hardening.

Safety precautions:

• if eyes are hit, flush with plenty of water. Avoid swallowing or inhaling the material. Seek medical attention if swallowed or if mucous membranes are affected;
• wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product;
• work in a well-ventilated area with (important!) low humidity (no more than 30-40%);
• the temperature must not be lower than 20 °C and not higher than 30 °C;
• work only with gloves, the resin can cause an allergic reaction on the skin;
• we recommend protecting your airways with a respirator or full-face mask;
• we recommend that children under 18 years of age, pregnant and breastfeeding women work with UV resin only with skin and respiratory protection, and that children only work under adult supervision.