Gift starter kit for making keychains - letters and numbers

Product detailed description

The set contains:

• Set of iCrystal casting resin: 300 g. For more information about the resin, click on its name.
• Silicone moulds:
  • silicone mould size: 36 x 19 x 0,8 cm.
• Paints and decorative materials:
  • metallic resin foils - set of 12 colours;
  • resin colours 3 pcs 5 ml.
• Jewellery components:
  • key rings with chain Ø25 mm - 30 pcs;
  • silver and gold connecting rings Ø10 mm - 40 pcs;
  • screw eyes silver and gold 5x10 mm - 40 pcs.
• Aids and accessories:
  • plastic film to cover the work surface;
  • jewellery pliers;
  • hand drill and 2 drills;
  • file for edge sanding;
  • disposable gloves 3 pairs;
  • wooden spatulas 10 pcs;
  • plastic spoon for mixing resin 5 pcs;
  • cups 15 pcs;
  • lighter to remove air bubbles in the resin.
• Instructions for processing epoxy resin.
• Instructions for working with the kit.

The kit comes with instructions for processing the epoxy resin and a table of mixing ratios. So if you plan to give the set as a gift, the recipient will only need a scale and can start making the original keyrings. You can buy the scale here .

Want to create more colour combinations? Buy metallic powders, dyes, metallic flakes, or other decorations to create more beautiful keychains. The mould is reusable and the possibilities for making keychains are countless!

How to make keychains out of letters?

Please pay attention!

• Colour display can vary greatly on different digital devices.
• Wear protective equipment when working with epoxy resin and pigment solutions. Cover the finished casting as best as possible to prevent dust from getting on it before final hardening.

Security measures:

• We recommend that children under 18 years of age, pregnant and nursing women work with epoxy resin only with skin and respiratory protection, and that children work only under adult supervision;
• if eyes are hit, flush with plenty of water. Avoid swallowing or inhaling material; if swallowed or if mucous membranes are affected, seek medical attention;
• wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product;
• work in a well-ventilated area with (important!) low humidity (no more than 30-40%);
• the temperature must be no lower than 20 °C and no higher than 25-27 °C;
• work only with gloves, the resin can cause an allergic reaction on the skin;
• we recommend protecting your airways with a respirator or full-face mask.

Standard hazard sentences:
H315 Irritating to skin.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
H411 Toxic to aquatic life with long-lasting effects.
Instructions for safe handling:
P102 Keep out of reach of children.
P103 Read the label before use.
P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols.
P264 Wash thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/goggles/face shield.
P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water.
P305+P351+P338 IF EYE INJURY: Rinse gently with water for several minutes. Remove contact lenses if they are
deployed and if they can be removed easily. Continue rinsing.
P391 Collect the leaked product.
P404 Store in closed container.
P405 Store locked.
P501 Dispose of contents/packaging according to local/regional/state regulations. Packaging contaminated by the product
take it to a hazardous waste collection facility.
Additional hazard information: EUH205 Contains epoxy components. May cause an allergic reaction.
Designation for dangerous substances:bis[4-(2,3-epoxypropoxy)phenyl]propane, ptert.butylphenyl-[1-(2,3-epoxy)propyl]-ether