Gift starter kit for making keychains - letters and numbers XXL

• Epoxy resin processing instructions and mixing ratio table.
• Instructions for working with the kit.
• Casting resin kit Fluid 500 g. For more information about the resin, click on its name.
• Silicone moulds:
• mould for letters a-z and numbers 36 x 19 x 0,8 cm;
• mould for letters a-z and numbers 13,5 x 13,5 x 0,5 cm.
• Paints and decorative materials:
• coloured metallic resin powders - set of 6 colours;
• set of dried and pressed flowers in a box;
• glitter glitter holographic - set of 12 pcs;
• set of FIMO decorative slices - mix of types.
• Jewellery components:
• rings with chain for making key rings 50 pcs;
• connecting rings approx. 60 pcs;
• screw loops for hanging key rings approx. 60 pcs;
• tassels for key rings 20 pcs.
• Aids and accessories:
• plastic film to cover the work surface;
• disposable nitrile gloves 5 pairs;
• resin mixing cups 10 pcs;
• wooden spatulas for mixing 15 pcs;
• plastic spoon for mixing resin 5 pcs;
• plastic pipette volume 3 ml 5 pcs;
• hand drill for jewellery and resin decorations with drill bits;
• jewellery pliers;
• file for edge sanding;
• lighter to remove air bubbles in the resin;
• disposable apron.

• Colour display can vary greatly on different digital devices.
• Wear protective equipment when working with epoxy resin and pigment solutions. Cover the finished casting as best as possible to prevent dust from getting on it before final hardening.

Security measures:

• We recommend that children under 18 years of age, pregnant and nursing women work with epoxy resin only with skin and respiratory protection, and that children work only under adult supervision;
• if eyes are hit, flush with plenty of water. Avoid swallowing or inhaling material; if swallowed or if mucous membranes are affected, seek medical attention;
• wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product;
• work in a well-ventilated area with (important!) low humidity (no more than 30-40%);
• the temperature must be no lower than 20 °C and no higher than 25-27 °C;
• work only with gloves, the resin can cause an allergic reaction on the skin;
• we recommend protecting your airways with a respirator or full-face mask.

Standard hazard sentences:
H315 Irritating to skin.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
H411 Toxic to aquatic life with long-lasting effects.
Instructions for safe handling:
P102 Keep out of reach of children.
P103 Read the label before use.
P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols.
P264 Wash thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/goggles/face shield.
P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water.
P305+P351+P338 IF EYE INJURY: Rinse gently with water for several minutes. Remove contact lenses if they are
deployed and if they can be removed easily. Continue rinsing.
P391 Collect the leaked product.
P404 Store in closed container.
P405 Store locked.
P501 Dispose of contents/packaging according to local/regional/state regulations. Packaging contaminated by the product
take it to a hazardous waste collection facility.
Additional hazard information: EUH205 Contains epoxy components. May cause an allergic reaction.
Designation for dangerous substances:bis[4-(2,3-epoxypropoxy)phenyl]propane, ptert.butylphenyl-[1-(2,3-epoxy)propyl]-ether