Oxide yellow color for resin COLORFUN series 25 ml

Product detailed description

VIDEO: How to choose a color for resin

With our dyes, your epoxy resin products will have a rich colour using just a few drops. This is due to the high concentration of the product. Not suitable for transparent dyeing.

Use:

the recommended percentage of colour pigment to the total amount of resin ranges from 1% (translucent effect) to 5% (for intense and opaque colours). Do not add more than 5% of the colouring agent to the total volume of the epoxy mixture. Mix thoroughly.

The colour intensity of the pigment solution depends on its dosage into the resin. All pigment solutions have a saturation limit, by layering layers the colour of the casting will be richer (darker).

The dyes can be mixed with each other, which allows you to get new colours and shades.

Colorfun dye can be used to create a transparent casting, but you only need to add a very small amount of this dye (literally on the tip of a toothpick). However, we recommend using specialised transparent dyes for this purpose.

Do not forget to shake the dye bottles from time to time, storing them for a long time without using them can affect the properties of the product.

Please pay attention!

• Colour display can vary greatly on different digital devices.
• We therefore strongly recommend that you test the amount of paint you need to achieve the desired effect before starting work.
• Wear protective equipment when working with epoxy resin and pigment solutions. Cover the finished casting as best as possible to prevent dust from getting on it before final hardening.
• Keep the bottles tightly closed and protect them from sunlight.

Precautions: if eyes are exposed, flush with plenty of water. Avoid swallowing or inhaling the material. Wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product.