Pentart UV glue, 20 ml

Product detailed description

Use:

Before applying the adhesive, degrease the bonded surfaces with an alcohol or nano cleaner. Cure through the UV-permeable (transparent) side with a UV lamp for a minimum of 20 seconds. If the adhesive has not cured properly after the first screening, repeat the process.

Security measures:

• if eyes are hit, flush with plenty of water. Avoid swallowing or inhaling the material. Seek medical attention if swallowed or if mucous membranes are affected;
• wash your hands thoroughly after work, especially before eating. Do not smoke, drink or eat while creating the product;
• work in a well-ventilated area with (important!) low humidity (no more than 30-40%);
• the temperature must be no lower than 20 °C and no higher than 25-27 °C;
• work only with gloves, UV glue can cause an allergic reaction on the skin;
• we recommend protecting your airways with a respirator or full-face mask.